0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)
In stock

0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90) - 300x200mm

Brand : Laserboard by PolyBAK
Ref : PB.LASBRDPB90.006.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Recyclable Recycled This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
filler
£0.80 £0.67

Product Options

Product Options

Request a sample
Free cutting
We will cut a sheet to fit the bed of your laser for free.

Key Features

0.6mm Laserboard - PolyBAK Brown 90-28 (prev ref PB90)

 

Laserboard by PolyBAK is the original Laserboard manufactured in the US by Richwood Industries. Because of its inherent strength, it is very popular with model-makers as the material remains strong even when large areas are cutaway. There are lots of imitations but if its not PolyBAK its a fake! PolyBAK is now available here from Hobarts who is the sole distributor in Europe. Key features • thin yet strong • strong yet light • cuts well on a laser • little or no burn marks • ideal for model-making and stencils

Technical

[content]

Videos

[content]

Shipping

[content]

Warranty

[content]

Sustainability

[content]

Customer Reviews

Based on 13 reviews
100%
(13)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Raymond Ore

0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)

H
Heather McAdam
Great product

Strong, pliable and easy to engrave and cut.

J
Jon Le Sueur
Brilliant

This is such a great product and so versatile. Its strength even when cut into small pieces is just second to none.

S
Stan Owen
Modelling with LaserBoard in 4mm

I have an Xtools D1 Pro and have used the 0.3mm and 0.6mm materials extensively with great success. I have some 0.9mm material for a future project but have not yet tried this out. Modelliong in 4mm scale, I have recently produced the components for a bowstring bridge in 0.6mm and am entirely happy with the results which include substantial numbers of lattice-pierced girders including flanges down to 1mm and which are suprisingly strong for such fine detail. When cutting LaserBoard, I attach the material to a "sacrificial sheet" of 6mm MDF with masking tape and turn off air assist as I find that the lightweight cut components can be blown in a position to interfere with the laser head.

A
Andrew

Fantastic quality product. Service is great!

123
UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Description

      Key Features

      0.6mm Laserboard - PolyBAK Brown 90-28 (prev ref PB90)

       

      Laserboard by PolyBAK is the original Laserboard manufactured in the US by Richwood Industries. Because of its inherent strength, it is very popular with model-makers as the material remains strong even when large areas are cutaway. There are lots of imitations but if its not PolyBAK its a fake! PolyBAK is now available here from Hobarts who is the sole distributor in Europe. Key features • thin yet strong • strong yet light • cuts well on a laser • little or no burn marks • ideal for model-making and stencils

  • Technical

      Technical

      [content]

  • Videos

      Videos

      [content]

  • Shipping

      Shipping

      [content]

  • Warranty

      Warranty

      [content]

  • Sustainability

      Sustainability

      [content]

  • Gallery

      Gallery

      [content]

  • Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 13 reviews
100%
(13)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Raymond Ore

0.6mm Laserboard - PolyBAK Brown model 90-28 (prev ref PB90)

H
Heather McAdam
Great product

Strong, pliable and easy to engrave and cut.

J
Jon Le Sueur
Brilliant

This is such a great product and so versatile. Its strength even when cut into small pieces is just second to none.

S
Stan Owen
Modelling with LaserBoard in 4mm

I have an Xtools D1 Pro and have used the 0.3mm and 0.6mm materials extensively with great success. I have some 0.9mm material for a future project but have not yet tried this out. Modelliong in 4mm scale, I have recently produced the components for a bowstring bridge in 0.6mm and am entirely happy with the results which include substantial numbers of lattice-pierced girders including flanges down to 1mm and which are suprisingly strong for such fine detail. When cutting LaserBoard, I attach the material to a "sacrificial sheet" of 6mm MDF with masking tape and turn off air assist as I find that the lightweight cut components can be blown in a position to interfere with the laser head.

A
Andrew

Fantastic quality product. Service is great!

123