1.6mm Brushed silver (gloss) on black laser engraving laminate ref 991
1.6mm Brushed silver (gloss) on black laser engraving laminate ref 991
1.6mm Brushed silver (gloss) on black laser engraving laminate ref 991
1.6mm Brushed silver (gloss) on black laser engraving laminate ref 991

1.6mm 1.6mm Brushed silver (gloss) on black laser engraving laminate ref 991 - 300x200mm

Brand : Hobarts
Ref : LL.SVR991.016.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
£4.38 £3.65
Thickness: 1.6mm
Size: 300x200mm
Free cutting
We will cut a sheet to fit the bed of your laser for free.

1.6mm laser engraving laminate with silver micro surface layer on a black core

This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

Suitable for both interior and exterior signage.

Clean with warm soapy water - do not use abrasives.

Available in 4 sizes: 300x200mm, 610x305mm, 610x400mm & 1220x610mm

***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

Customer Reviews

Based on 6 reviews
83%
(5)
0%
(0)
17%
(1)
0%
(0)
0%
(0)
N
Nat Marsh
Great brushed silver laminate!

As a model maker it’s very difficult to find laser compatible materials which also work at a reduced scale. This laminate has a nice fine texture which gives a convincing brushed metal effect with just the right amount of gloss finish. Looks just like metal.

C
Chris

Expensive

D
Darren Bentley
Brushed Silver Laminate

Great material to work with and looks amazing aswell. Highly recommended

M
Mark Sanders
Lovely

Arrived quickly (as always), well packaged. Engraved really nicely, but does take a little more effort to cut through compared to single colour acrylic (I assume that might be a glue thing). I only mention this as an aide to those people using relatively low power machines.
In short, lovely stuff highly recommended.

m
mark

1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991

12
UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Product description

      1.6mm laser engraving laminate with silver micro surface layer on a black core

      This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

      Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

      Suitable for both interior and exterior signage.

      Clean with warm soapy water - do not use abrasives.

      Available in 4 sizes: 300x200mm, 610x305mm, 610x400mm & 1220x610mm

      ***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

  • Product Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 6 reviews
83%
(5)
0%
(0)
17%
(1)
0%
(0)
0%
(0)
N
Nat Marsh
Great brushed silver laminate!

As a model maker it’s very difficult to find laser compatible materials which also work at a reduced scale. This laminate has a nice fine texture which gives a convincing brushed metal effect with just the right amount of gloss finish. Looks just like metal.

C
Chris

Expensive

D
Darren Bentley
Brushed Silver Laminate

Great material to work with and looks amazing aswell. Highly recommended

M
Mark Sanders
Lovely

Arrived quickly (as always), well packaged. Engraved really nicely, but does take a little more effort to cut through compared to single colour acrylic (I assume that might be a glue thing). I only mention this as an aide to those people using relatively low power machines.
In short, lovely stuff highly recommended.

m
mark

1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991

12