Hobarts

Re-stocking soon

Hobarts UP! Printer ABS Filament Red Twin Pack 2 x 500g

Twin pack of Red ABS Filament for the entire UP! 3D Printer range. 2 x 500g spools.

£42 £50.40

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts UP! Printer ABS Filament White Twin Pack 2 x 500g

Twin pack of White ABS Filament for the entire UP! 3D Printer range. 2 x 500g spools.

£42 £50.40

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts UP! Printer ABS Filament Yellow Twin Pack 2 x 500g

Twin pack of Yellow ABS Filament for the entire UP! 3D Printer range. 2 x 500g spools.

£42 £50.40

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts UP! Printer PLA Filament Hawaii Blue Twin Pack 2 x 500g

Twin pack of Hawaii Blue PLA Filament for the entire UP! 3D Printer range. 2 x 500g spools. PLA...

£42 £50.40

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts UP! Printer PLA Filament Pompeii Grey Twin Pack 2 x 500g

Twin pack of Pompeii Grey PLA Filament for the entire UP! 3D Printer range. 2 x 500g spools. PL...

£42 £50.40

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts UP300 Desktop 3D Printer

The UP300 Desktop 3D Printer has a large build volume and consistent performance across different...

£2,400 £2,880

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts VLS2.30 - 25 watts - Red - RESERVED

VLS2.30 - 25 watts - Previously Owned - £7,995 +VAT - RESERVED 25 Watts Red New Cartridge Rechar...

£7,995 £9,594

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts VLS4.60 - 50 watts - Ex Demonstration

VLS4.60 – 50 watts (Ex Demonstration) - £13,995 +VAT DOES NOT INCLUDE Extraction or Air Assist c...

£13,995 £16,794

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts VLS4.60 - 50 watts - Red - Previously Owned

VLS4.60 - 50 watts - Red - Previously Owned - SOLD 50 Watt Red New Cartridge Recharge Air Assist...

£40,000 £48,000

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Re-stocking soon

Hobarts VLS4.60 - 50 watts - Red - Previously Owned

VLS4.60 - 50 watts - Red - Previously Owned - SOLD 50 Watt Red New Cartridge Recharge Air...

£20,995 £25,194

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Recover password

Create my account

Hobarts