Cutting
This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Recycled
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
This 3.0mm MDF is manufactured by FINSA and sold under the FIBRANOR brand.
FIBRANOR is a thin board made of selected wood fibres (MDF).
Specifications
FIBRANOR is a perfectly flat and calibrated high density board. It shows a good warping performance and it can be easily stapled or bent. FIBRANOR can be easily glued, bent, printed, veneered or coated with PVC or decorative paper through simple technologies. Its excellent strength/weight relation makes it ideal for a wide variety of uses. E1 classification: low formaldehyde content.
Applications
In the furniture industry it is used for furniture back parts, curved structures or the lower part of drawers. Other uses: industrial electronics, the manufacture of footwear, mouldings, indoor woodwork.
Widely used in
Architecture
Carpentry
Construction
Decor
Furniture
Manufacturing
Model-making
***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***
*Larger sheets maybe available - please ask*
I'm not very experienced at laser cutting MDF, but this stuff works just fine, and was black enough for the simple items I was doing, without further finishing.
The product received was exactly as described, well packaged and delivered quickly.
I find this MDF really useful for making giftsd out of that I used to spray black but now don't have to.
The data states only to be used with CO2 lasers but my 10w diode laser happily cuts through this.
Order turned up prompt, correct and undamaged. Thank you!
We use a lot of MDF in our work shop but nearly always need to paint after laser cutting due to scorch marks, but not with this product a light sand of the cut edges and super easy clean up. We laser engraved our logo into it and the results are very pleasing. We will be using a lot more of the product in the future.
This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from:
£6.50 for up to 1kg
£7.25 for up to 5kg
£7.50 for up to 10kg
£8.00 for up to 15kg
£9.50 for up to 20kg
Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.
We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg
*correct as at 10.02.2023
I'm not very experienced at laser cutting MDF, but this stuff works just fine, and was black enough for the simple items I was doing, without further finishing.
The product received was exactly as described, well packaged and delivered quickly.
I find this MDF really useful for making giftsd out of that I used to spray black but now don't have to.
The data states only to be used with CO2 lasers but my 10w diode laser happily cuts through this.
Order turned up prompt, correct and undamaged. Thank you!
We use a lot of MDF in our work shop but nearly always need to paint after laser cutting due to scorch marks, but not with this product a light sand of the cut edges and super easy clean up. We laser engraved our logo into it and the results are very pleasing. We will be using a lot more of the product in the future.
Skip to content
