1.6mm/3.0mm Black (matt) on white laser engraving laminate ref 901
1.6mm/3.0mm Black (matt) on white laser engraving laminate ref 901
1.6mm/3.0mm Black (matt) on white laser engraving laminate ref 901
1.6mm/3.0mm Black (matt) on white laser engraving laminate ref 901

1.6mm 1.6mm/3.0mm Black (matt) on white laser engraving laminate ref 901 - 300x200mm

Brand : Hobarts
Ref : LL.BLK901.016.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
£4.38 £3.65
Thickness: 1.6mm
Size: 300x200mm
Free cutting
We will cut a sheet to fit the bed of your laser for free.

1.6mm or 3.0mm laser engraving laminate with black micro surface layer on a white core

This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

Suitable for both interior and exterior signage.

Clean with warm soapy water - do not use abrasives.

For best results we recommend engraving bottom to top so that your air assist is not dragging the colour across a lighter core colour

Available in 4 sizes: 300x200mm, 610x305mm, 600x400mm & 1220x610mm

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Adrian Frost
Superb product

Very nice to work with and strong enough to use as counter/table signs with very little support. Engraves perfectly and the end result looks fabulous.

M
Mr R TREDOUX
Not just for lasers

I bought the 3mm black/white laminate to use in my micro-mill machine for making electrical switch panels for my boat. The laminate proved to be perfect for the job, it's tough but not abrasive for the cutter and produced a crisp, clean edge with a 0.2mm 20 degree v-bit. I used quite a bit setting up the machine, so I got to try a few different settings, but the laminate produced great results every time. I'll be back to buy more when I need to do the next project :)

K
KEVIN JACOBS
Sheet material

Good product delivered quickly

C
Chris Lowe
Perfect

Great service and product not more I can say other than thanks

S
Stephen Farmer
Favorite Product

Absolutely love this laminate, very consistent and the results are stunning.in all colours.
I would like some more color options though and options for a thicker product that is a little more rigid but with the same laminate style

User picture
UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Product description

      1.6mm or 3.0mm laser engraving laminate with black micro surface layer on a white core

      This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

      Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

      Suitable for both interior and exterior signage.

      Clean with warm soapy water - do not use abrasives.

      For best results we recommend engraving bottom to top so that your air assist is not dragging the colour across a lighter core colour

      Available in 4 sizes: 300x200mm, 610x305mm, 600x400mm & 1220x610mm

  • Product Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Adrian Frost
Superb product

Very nice to work with and strong enough to use as counter/table signs with very little support. Engraves perfectly and the end result looks fabulous.

M
Mr R TREDOUX
Not just for lasers

I bought the 3mm black/white laminate to use in my micro-mill machine for making electrical switch panels for my boat. The laminate proved to be perfect for the job, it's tough but not abrasive for the cutter and produced a crisp, clean edge with a 0.2mm 20 degree v-bit. I used quite a bit setting up the machine, so I got to try a few different settings, but the laminate produced great results every time. I'll be back to buy more when I need to do the next project :)

K
KEVIN JACOBS
Sheet material

Good product delivered quickly

C
Chris Lowe
Perfect

Great service and product not more I can say other than thanks

S
Stephen Farmer
Favorite Product

Absolutely love this laminate, very consistent and the results are stunning.in all colours.
I would like some more color options though and options for a thicker product that is a little more rigid but with the same laminate style

User picture