LaserPlyLITE – Italian Poplar Plywood Grade B/BB
LaserPlyLITE – Italian Poplar Plywood Grade B/BB
LaserPlyLITE – Italian Poplar Plywood Grade B/BB
LaserPlyLITE – Italian Poplar Plywood Grade B/BB

3.0mm LaserPlyLITE – Italian Poplar Plywood Grade B/BB - 300x200mm

Brand : Hobarts
Ref : WO.PLYLITE.03.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
£1.25 £1.04
Thickness: 3.0mm
Size: 300x200mm
Free cutting
We will cut a sheet to fit the bed of your laser for free.

LaserPlyLITE – Italian Poplar plywood grade B/BB available in 3mm, 4mm, 6mm and 9mm


LaserPlyLite plywood is produced in southern Europe. It is approximately 30% less dense than Russian Birch Ply and therefore cuts much easier especially on lower powered lasers.

In tests comparing this with Russian Birch ply, we reduced power setting by 30% and increased speed setting by 10% and achieved excellent results.

Layers/plies: 3mm and 4mm has 3 layers, 6mm has 5 layers and 9mm has 7 layers

*Ideal for lasers with low power*

*Larger sheets maybe available - please ask*

***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

Thickness tolerance for this product is +0.2mm/-0.4mm

Grain Direction

Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.

Customer Reviews

Based on 44 reviews
93%
(41)
7%
(3)
0%
(0)
0%
(0)
0%
(0)
P
Paul Weare
Great product

Top quality product and great service I would highly recommend

P
Paul Brown
Just what i needed

swift delivery, as described, great quality, what's not to like? Will certainly be back and will recommend to my fellow crafters

M
Marcus Clark
Good wood

Hi I found the wood was good to cut but the laser did struggle in places.
It also had a bend in it but that could be down to delivery however all that said I will be buying again oh and always could do with being a bit cheaper

D
David Stacey
Laser ply ,Italian Poplar plywood

Having tried this plywood out on my laser machine, there are times when I am engraving an image and then the plywood pops and a little flame occurs for a split second ,just wondering if it is something in the glue or some other thing causing it to do this

D
David Stewart
Great laser ply

Bought another packet of laser plywood, it great it maybe grade B, but it great to work with. A light sand to get rid of any burn marks. Will definitely be buying more.

123
UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Product description

      LaserPlyLITE – Italian Poplar plywood grade B/BB available in 3mm, 4mm, 6mm and 9mm


      LaserPlyLite plywood is produced in southern Europe. It is approximately 30% less dense than Russian Birch Ply and therefore cuts much easier especially on lower powered lasers.

      In tests comparing this with Russian Birch ply, we reduced power setting by 30% and increased speed setting by 10% and achieved excellent results.

      Layers/plies: 3mm and 4mm has 3 layers, 6mm has 5 layers and 9mm has 7 layers

      *Ideal for lasers with low power*

      *Larger sheets maybe available - please ask*

      ***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

      Thickness tolerance for this product is +0.2mm/-0.4mm

      Grain Direction

      Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.

  • Product Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 44 reviews
93%
(41)
7%
(3)
0%
(0)
0%
(0)
0%
(0)
P
Paul Weare
Great product

Top quality product and great service I would highly recommend

P
Paul Brown
Just what i needed

swift delivery, as described, great quality, what's not to like? Will certainly be back and will recommend to my fellow crafters

M
Marcus Clark
Good wood

Hi I found the wood was good to cut but the laser did struggle in places.
It also had a bend in it but that could be down to delivery however all that said I will be buying again oh and always could do with being a bit cheaper

D
David Stacey
Laser ply ,Italian Poplar plywood

Having tried this plywood out on my laser machine, there are times when I am engraving an image and then the plywood pops and a little flame occurs for a split second ,just wondering if it is something in the glue or some other thing causing it to do this

D
David Stewart
Great laser ply

Bought another packet of laser plywood, it great it maybe grade B, but it great to work with. A light sand to get rid of any burn marks. Will definitely be buying more.

123