LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR
LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR
LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR
LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR

0.8mm LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR - 300x200mm

Brand : Hobarts
Ref : WO.PLYPREM.008.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
£4.25 £3.54
Thickness: 0.8mm
Size: 300x200mm
Free cutting
We will cut a sheet to fit the bed of your laser for free.

LaserPlyPREMIER Birch plywood sheet from Finland available in 0.8mm, 1.5mm & 3.0mm

This plywood is superb for laser cutting. The 3mm sheet has 6 plies (layers) so it is much stronger than standard Birch Plywood. Because of its strength, this material is used to manufacture hockey sticks, snow boards etc. It is also the preferred choice for architectural models where fine detail is required.

 

Being a natural product, the colour/shade of wood will alter with each batch.

Every effort is made to supply flat sheets but unavoidable warping may occur. It may be necessary to tape the wood to the laser bed.

Plywood has a tendency to curl because the veneer is rotary peeled from cylindrical logs and the nature of the fibres will tend to revert to their original format: ie round.

This means that while there are manufacturing standards for length, width and squareness there are none for the flatness of plywood. Plywood of 12mm and less have fewer laminations so will be more prone to curling, both on account of the forces and tensions within the board and the board's relative weakness with respect to external forces during storage and transport.

We recommend customers try to keep stocks of plywood so the wood has sufficient time to acclimatise to their new environment. Where possible, please store where the tempeature/humidy is constant.

 

***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

*Larger sheets maybe available - please ask*

 

Grain Direction
Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.

 

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Paul Weare
Great product

So pleased with the service and the product.

G
Gordon Burnett
Replacement pieces

Prompt polite service in replacing to unsuitable but natural marker pieces of plywood. Thank you very much

S
Simon Fennell
Excellent Service

Hobarts have always provided me with excellent service, whether that be product information or supply. My orders always arrive within a couple of days and sometimes one of the team delivers my order personally on his way home from work. Outstanding.

M
Mathew Dawson

LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR

M
Maura Bourke
Great

Great product & fast shipping

12
UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Product description

      LaserPlyPREMIER Birch plywood sheet from Finland available in 0.8mm, 1.5mm & 3.0mm

      This plywood is superb for laser cutting. The 3mm sheet has 6 plies (layers) so it is much stronger than standard Birch Plywood. Because of its strength, this material is used to manufacture hockey sticks, snow boards etc. It is also the preferred choice for architectural models where fine detail is required.

       

      Being a natural product, the colour/shade of wood will alter with each batch.

      Every effort is made to supply flat sheets but unavoidable warping may occur. It may be necessary to tape the wood to the laser bed.

      Plywood has a tendency to curl because the veneer is rotary peeled from cylindrical logs and the nature of the fibres will tend to revert to their original format: ie round.

      This means that while there are manufacturing standards for length, width and squareness there are none for the flatness of plywood. Plywood of 12mm and less have fewer laminations so will be more prone to curling, both on account of the forces and tensions within the board and the board's relative weakness with respect to external forces during storage and transport.

      We recommend customers try to keep stocks of plywood so the wood has sufficient time to acclimatise to their new environment. Where possible, please store where the tempeature/humidy is constant.

       

      ***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***

      *Larger sheets maybe available - please ask*

       

      Grain Direction
      Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.

       

  • Product Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Paul Weare
Great product

So pleased with the service and the product.

G
Gordon Burnett
Replacement pieces

Prompt polite service in replacing to unsuitable but natural marker pieces of plywood. Thank you very much

S
Simon Fennell
Excellent Service

Hobarts have always provided me with excellent service, whether that be product information or supply. My orders always arrive within a couple of days and sometimes one of the team delivers my order personally on his way home from work. Outstanding.

M
Mathew Dawson

LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR

M
Maura Bourke
Great

Great product & fast shipping

12