In stock

Pre Filters for Beam Air (pack of 4)

Brand : Flux
Ref : EX.FL.PREX4
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
filler
Sale price£21.60 Sale price£18

Pre-filter replacement 

These are the replacement Pre-filters for your Beam Air.

They are packaged per 4. 

They need to be replaced every 10-30 hours.

 

 

 

Don't forget to replace the other filters in time:

 

Remove the filters

Just open the top cover of the filter and remove the box from the inside. Then take out the Pre-filter and pull on the lids on each side of the Medium efficiency filter, put this aside and repeat the same steps with the charcoal filter. The box that's left is the H13 HEPA filter.

Replace what is necessary.

Reassemble:

Reinsert the filters in this order: From left to right.

 

 

Lasers shipping information

New machines are normally airfreighted from Phoenix, Arizona to London Heathrow and then delivered to the customer by World Transport Agency Group. Sometimes new machines are held in stock by Hobarts in which case delivery is made by WTA Group or, on occasions, by our own engineers.

Enter Postcode: