Laser grade Birch Plywood wood pack.
Pack consists of the following:
3mm Birch ply 10x sheets
4mm Birch ply 10x sheets
6mm Birch ply 10x sheets
Being a natural product, the colour/shade of wood will alter with each batch.
Every effort is made to supply flat sheets but unavoidable warping may occur. It may be necessary to tape the wood to the laser bed.
Plywood has a tendency to curl because the veneer is rotary peeled from cylindrical logs and the nature of the fibres will tend to revert to their original format: ie round.
This means that while there are manufacturing standards for length, width and squareness there are none for the flatness of plywood. Plywood of 12mm and less have fewer laminations so will be more prone to curling, both on account of the forces and tensions within the board and the board's relative weakness with respect to external forces during storage and transport.
We recommend customers try to keep stocks of plywood so the wood has sufficient time to acclimatise to their new environment. Where possible, please store where the tempeature/humidy is constant.
***All dimensions are nominal - sheets maybe supplied up to 2mm undersize on each edge***
Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.
This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from:
£6.50 for up to 1kg
£7.25 for up to 5kg
£7.50 for up to 10kg
£8.00 for up to 15kg
£9.50 for up to 20kg
Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.
We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg
*correct as at 10.02.2023