Cutting
This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
IMPORTANT: In future, we will only stock B/BB grade. Until current stocks are exhausted, customers may receive a mixture of both B/BB and AB/AB grades.
3.0mm LaserPlyLITE – Italian Poplar plywood grade B/BB
LaserPlyLITE Poplar plywood is produced in Italy. It is approximately 30% less dense than Russian Birch Ply and therefore cuts much easier especially on lower powered lasers.
In tests comparing this with Russian Birch ply, we reduced power setting by 30% and increased speed setting by 10% and achieved excellent results.
*Ideal for lasers with low power*
*Larger sheets maybe available - please ask*
Grain Direction
Customers must specify if they require the grain in a particular direction. Please enter any requests in the comments box at checkout.
We use a number of shippers depending on the size, weight and destination. This information may change but as a guide we ship as follows:
UK mainland
- parcels under 1 metre
DPD
- parcels over 1 metre UPS
All weights & sizes:
Northern Ireland - UPS
Isle of Wight & Isle of Man - UPS
Scottish Highlands & Islands - UPS
Channel Islands - DHL
Ireland - DHL
Europe - DHL
Skip to content
