1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991
1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991
Roll over image to zoom in
1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991
1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991

1.6mm 1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991 - 300x200mm

Brand : Hobarts
Ref : LL.SVR991.016.3020
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
£4.38 £3.65
Thickness: 1.6mm
Size: 300x200mm
Free cutting
We will cut a sheet to fit the bed of your laser for free.

1.6mm or 3.0mm laser engraving laminate with silver micro surface layer on a black core

This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

Suitable for both interior and exterior signage.

Clean with warm soapy water - do not use abrasives.

Available in 4 sizes: 300x200mm, 610x305mm, 610x400mm & 1220x610mm

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
m
mark

1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991

K
Keith Salway
Its very good stuff

I etched and cut this acrylic laminate on my 80W Co2 Laser to produce items for a local theatre to trial with very impressive results. If the project goes forward, I'll be ordering a whole lot more of this material.
Very easy to dial in the settings and produces very clean sharp results. I'm very pleased with it.

UK deliveries

This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
      £6.50 for up to 1kg
      £7.25 for up to 5kg
      £7.50 for up to 10kg
      £8.00 for up to 15kg
      £9.50 for up to 20kg

Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

Overseas deliveries

We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

      *correct as at 10.02.2023

Enter Postcode:
  • Product description

      1.6mm or 3.0mm laser engraving laminate with silver micro surface layer on a black core

      This product is specially manufactured for Hobarts and for processing on a laser.  It is a 2-ply sheet with a micro thin (0.1mm) top layer on a coloured core. By engraving away the top layer it reveals the core colour

      Unlike similar products, the core is acrylic only. It does not have an ABS layer which is really designed for rotating carbide engravers and makes it more difficult to achieve excellent results when laser engraving.

      Suitable for both interior and exterior signage.

      Clean with warm soapy water - do not use abrasives.

      Available in 4 sizes: 300x200mm, 610x305mm, 610x400mm & 1220x610mm

  • Product Reviews
  • Shipping Info
      UK deliveries

      This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from: 
            £6.50 for up to 1kg
            £7.25 for up to 5kg
            £7.50 for up to 10kg
            £8.00 for up to 15kg
            £9.50 for up to 20kg

      Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
      For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.

      Overseas deliveries

      We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg

            *correct as at 10.02.2023

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
m
mark

1.6mm/3.0mm Brushed silver (gloss) on black laser engraving laminate ref 991

K
Keith Salway
Its very good stuff

I etched and cut this acrylic laminate on my 80W Co2 Laser to produce items for a local theatre to trial with very impressive results. If the project goes forward, I'll be ordering a whole lot more of this material.
Very easy to dial in the settings and produces very clean sharp results. I'm very pleased with it.