Note - Extraction system not included.
Free-standing unit with integrated cart, motorized Z-axis, auto focus, X-Y beam positioning system, self adjusting spring loaded sealed bearings, stationary processing table, Quick Change Laser Cartridge™ compatibility, shielded optics path, interchangeable focusing optics, flash upgradeable electronics, job complete indicator, system status indicator, relocatable origin, enhanced vector cutting, 3D engraving and rubber stamp mode.
UL-10, -25, -30, -35, -40, -45, or -50 watt air-cooled, RF driven, sealed CO2 laser in the pre-aligned Quick Change Cartridge™.
Available Accessories - Rotary fixture, cutting table, lens kits, coaxial air assist with optics protection, USB con-nection kit and ethernet connection kit. The M-300 is not compatible with dual head or computer controlled air assist.
Electrical - Single phase 110 VAC, 15 amp, 50/60 Hz Single phase 220 VAC, 8 amp, 50/60 Hz
Exhaust - Fume exhaust required (not included). One 4" (102mm) connection requiring 250 CFM air flow at a static pressure of 6 inches of water (425m3/hr at 1.5kPa).
Cooling - Air-cooled, ambient operating range of 50°-95°F (10°-35°C).
Focusing Optics - Standard 2.0" (50mm) focal length lens in enclosed lens cartridge; optional lenses available.
Power Control - Digital power control continuously variable from 0 to 100%, automatic proportional pulsing and color linked power settings.
Work Area 24" x 12" (609 x 304mm)
Table Size 29" x 17" (736 x 431mm)
Maximum Part Size 29" wide x 17" deep x 9" thick (736 x 431 x 228mm)
Computer Interface Parallel port standard.