LaserPlyLite plywood is produced in southern Europe. It is approximately 30% less dense than Russian Birch Ply and therefore cuts much easier especially on lower powered lasers.
In tests comparing this with Russian Birch ply, we reduced power setting by 30% and increased speed setting by 10% and achieved excellent results.
Layers/plies: 3mm and 4mm has 3 layers, 6mm has 5 layers and 9mm has 7 layers
*Ideal for lasers with low power*
Please note there is a £25 surcharge (plus VAT) on all parcels over 1 metre long