Laser grade Birch Plywood Wood sample pack

  • Model
  • WO.PLYSTD.PAK01
Cutting Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable Recyclable This item can be recycled
Sustainable Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
Information
 In stock

Product Options

Click here if you would prefer to display prices without VAT

Quantity Discounts 5+, 10+, 25+, 50+, 100+
alter quantity to see price change
£61.50 (inc VAT)
 

 

Description:

Laser grade Birch Plywood wood pack.

Pack consists of the following:
     3mm Birch ply 10x sheets
     4mm Birch ply 10x sheets
     6mm Birch ply 10x sheets

Being a natural product, the colour/shade of wood will alter with each batch. 

Every effort is made to supply flat sheets but unavoidable warping may occur. It may be necessary to tape the wood to the laser bed.

Plywood has a tendency to curl because the veneer is rotary peeled from cylindrical logs and the nature of the fibres will tend to revert to their original format: ie round.

This means that while there are manufacturing standards for length, width and squareness there are none for the flatness of plywood. Plywood of 12mm and less have fewer laminations so will be more prone to curling, both on account of the forces and tensions within the board and the board's relative weakness with respect to external forces during storage and transport.

We recommend customers try to keep stocks of plywood so the wood has sufficient time to acclimatise to their new environment. Where possible, please store where the tempeature/humidy is constant.

 

 

Reviews (0)