Sub-Total £0.00
Hobarts
Product Categories
New products
Enduramark Black Laser Marking Spray creates a solid black laser engraving on uncoated...
£65.00
(ex VAT)
3.0mm Birch faced LaserPlyLITE - Italian Poplar plywood with Birch veneer on 2 sides gr...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.26
(ex VAT)
Balsa is a tree growing along the Equator which needs humidity and will normally be fou...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.32
(ex VAT)
4.0mm Birch faced LaserPlyLITE - Italian Poplar plywood with Birch veneer on 2 sides gr...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.49
(ex VAT)
In stock
6.0mm Birch faced LaserPlyLITE - Italian Poplar plywood with Birch veneer on 2 sides gr...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.98
(ex VAT)
In stock
Balsa is a tree growing along the Equator which needs humidity and will normally be fou...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£3.02
(ex VAT)
In stock
3.0mm Moso Bamboo side pressed 1-ply NATURAL veneer
*Larger sheet si...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£3.15
(ex VAT)
3mm Moso Bamboo side pressed 1-ply CARAMEL veneer
*Larger sheet size...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£3.15
(ex VAT)
In stock
Balsa is a tree growing along the Equator which needs humidity and will normally be fou...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£4.12
(ex VAT)
3.0mm LaserPlyPremier Birch plywood sheet from Finland
This plywood is superb ...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£4.26
(ex VAT)
