Sub-Total £0.00
Featured products
Product Categories
New products
The BOFA 3D PrintPRO 2 is a low cost unit, which extracts fumes generated by an open...
£499.00
(ex VAT)
In stock
4.0mm Birch faced LaserPlyLITE - Italian Poplar plywood with Birch veneer on 2 sides gr...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.49
(ex VAT)
Green Cast® is a 100% recycled and 100% recyclable cast acrylic sheet with a high m...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
£1.84
(ex VAT)
In stock
6.0mm Birch faced LaserPlyLITE - Italian Poplar plywood with Birch veneer on 2 sides gr...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources.
This material is covered by the Forestry Stewardship Council scheme.
£1.98
(ex VAT)
3.0mm glitter acrylic sheets available in a range of colours that will add sparkle to y...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
£5.28
(ex VAT)
Pack contains 5 sheets of 3.0mm Perspex® Fluorescent colours Acid Green 6T66, ...
Cutting
This item can be cut using a CO2 laser.
You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser.
Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser.
It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
£28.82
(ex VAT)
The BOFA 3D PrintPRO 2 is a low cost unit, which extracts fumes generated by an open...
£499.00
(ex VAT)
